Kogi State Polytechnic Cut-Off Mark 2024/2025

The Kogi State Polytechnic, Lokoja is a state-owned tertiary institution in Kogi State, Nigeria. The polytechnic offers National Diploma (ND) and Higher National Diploma (HND) programs across various departments. Like other polytechnics in Nigeria, Kogi State Polytechnic adopts cut-off marks for its admission process. This cut off mark serves as a screening tool for the selection of qualified candidates seeking admission into the polytechnic.

In this blog post, we will provide detailed information on the Kogi State Polytechnic cut-off mark for the 2024/2025 academic session. We will highlight the cut-off marks for each department and course offered at both ND and HND levels. Read on to learn everything you need to know about the Kogi State Polytechnic cut-off mark.

Overview of Kogi State Polytechnic

The Kogi State Polytechnic, Lokoja was established in 1992 during the administration of the old Kwara State. The institution became a full-fledged polytechnic in 1993 when Kogi State was created. The polytechnic is located in Felele, Lokoja, the capital city of Kogi State.

Kogi State Polytechnic is currently made up of six schools namely:

• School of Applied Sciences
• School of Engineering
• School of Environmental Studies
• School of Management Studies
• School of Information and Communications Technology
• School of General Studies

These schools have various academic departments that run both ND and HND programs. The polytechnic is accredited by the National Board for Technical Education (NBTE) to award national diplomas and higher national diplomas. It is also approved by the Joint Admissions and Matriculation Board (JAMB) for technical and vocational education training.

Kogi State Polytechnic Cut Off Mark 2024/2025

The management of Kogi State Polytechnic has announced the cut-off mark for the 2023/2024 academic session post-UTME screening exercise. To be eligible to participate in the post-UTME screening, candidates must have scored 100 or above in the Unified Tertiary Matriculation Examination (UTME). This UTME score of 100 is the established cutoff mark set as the minimum benchmark by the polytechnic for the first stage of admission consideration into all National Diploma (ND) and Higher National Diploma (HND) programmes.

Candidates who meet this cutoff score of 100 and above in their UTME will proceed to the next stage of sitting for the post-UTME screening exercise. On the other hand, candidates who score below 100 in UTME are automatically disqualified and will not be eligible to participate in the Kogi State Polytechnic post-UTME screening exercise. Meeting the 100 cutoff mark in UTME is a mandatory academic requirement candidates must attain to be considered for admission into the polytechnic for the 2023/2024 admission year.

Kogi State Polytechnic Departmental Cut Off Mark

The Kogi State Polytechnic cut off mark for the 2024/2025 admission exercise are outlined below:

How to Calculate Kogi State Polytechnic Aggregate Cut-Off Mark Score

It is important for all candidates who participated in the Kogi State Polytechnic post-UTME screening exercise to calculate their aggregate scores correctly for confirmation of admission.

To compute your aggregate admission score for Kogi State Polytechnic, follow these simple steps:

1. First, divide your UTME score by 8. For example, if you scored 200 in UTME, 200/8 = 25.
2. Next, divide your post-UTME screening score by 2. For instance, if your post-UTME score is 50, 50/2 = 25.
3. Finally, add your UTME and post-UTME quotients together to arrive at your aggregate score.

Using the example above, if you scored 200 in UTME and 50 in post-UTME, your aggregate score computation will be:

UTME Score = 200 Post UTME Score = 50

UTME Quotient: 200/8 = 25 Post UTME Quotient: 50/2 = 25

Aggregate Score = UTME Quotient + Post UTME Quotient = 25 + 25 = 50

Therefore, if you scored 200 in UTME and 50 in post-UTME, your aggregate admission score for Kogi State Polytechnic is 50. This scoring system weighs your UTME and post-UTME results equally.

How Kogi State Polytechnic Arrives at Cut-Off Mark

The Kogi State Polytechnic management does not arbitrarily set cut-off marks for courses. Certain factors are put into consideration when determining the minimum benchmark for each department annually. Some of the key factors considered include:

• The difficulty level of each course and the number of applicants received
• The available admission quota approved for the department
• Academic performance of candidates from previous admissions
• Standard of the polytechnic and requirements of regulatory bodies
• Entry requirements for professional courses like Medicine, Law, Engineering, etc.
• Gender and geographical balance in the admission process.

By analyzing these factors annually, the cut-off marks are set to reflect the reality on the ground. Cut-off marks may increase for departments with a high number of applicants and competitive entry requirements. While courses with fewer applicants may have lower cut-off marks.

The cut-off marks are usually recommended by each department based on the factors outlined above. The recommendations are then reviewed by the academic board and the management gives the final approval. This allows for input from all stakeholders in setting a realistic cut off mark benchmark.

Importance of Cut-Off Marks in Kogi State Polytechnic

The Kogi State Polytechnic cut-off marks serve several purposes in the admission process of the institution. Below are some benefits:

• Ensures Transparency: The cut-off mark creates a fair and transparent admission process by establishing a standard for selecting candidates for various departments.
• Controls Admission Population: It helps control the number of candidates admitted into departments by setting minimum academic performance requirements.
• Upholds Academic Standards: Cut-off marks uphold standards by ensuring only qualified candidates with the capacity to cope are admitted.
• Eliminates Bias: Setting a fixed cut-off mark eliminates discretion and influences that may lead to favoritism in the admission process.
• Provides Admission Guidelines: The cut-off mark gives admission seekers an insight into the academic credentials required to increase their chances of securing admission.
• Enhances Competition: It fosters healthy academic competition among admission seekers who strive to attain the benchmark or exceed it for competitive advantage.

The Kogi State Polytechnic cut-off marks ensure merit-based admissions, uphold quality, enhance transparency and provide a guide for admission seekers.

Factors that May Affect Cut-Off Marks

While cut-off marks are generally fixed for each academic session, there are circumstances that may warrant changes in the minimum benchmarks by departments. Some factors that may affect cut-off marks include:

• Introduction of new courses or departments
• Increase or decrease in admission quota approved for the department
• Stiff competition in a particular course which raises t off mark
• Poor academic performance by previous intakes which leads to lower cut-off marks
• Changes in academic policies or entry requirements by regulatory agencies
• Overhaul of the admission process by JAMB or the institution
• Increase or decrease in the number of applicants against the available departmental quota.

When any of these scenarios occur, departments have to review and adjust their cut-off marks accordingly to meet new realities and ensure optimal admissions. The cut-off marks may not necessarily reduce, sometimes competition may increase the cut-off mark.

How to Check Kogi State Polytechnic Cut-Off Mark

Kogi State Polytechnic publicizes the approved cut-off marks to enable prospective students to have access and prepare adequately for the admission process. Below are ways to check Kogi State Polytechnic cut-off marks:

• Visit the polytechnic’s portal at www.ksp.edu.ng: The cut-off marks are published online on the official website.
• Check the polytechnic notice boards: Cut-off marks are usually displayed on the general notice boards.
• Follow the polytechnic’s social media pages for updates: Cut-off marks are announced on the polytechnic’s Facebook, Twitter, Instagram pages, etc.
• Email the admissions office for inquiries: Send an email to the admissions department to make inquiries.

By checking through these mediums, prospective applicants can have accurate details of Kogi State Polytechnic’s minimum cut-off marks for all courses.

How to Meet the Kogi State Polytechnic Cut-Off Mark

Meeting the Kogi State Polytechnic cut-off mark requires early preparation and hard work. Below are tips that can enhance your ability to attain the required cut-off mark:

• Choose your course wisely based on your subject strengths and career interests. Avoid taking courses with cut-off marks you cannot realistically attain.
• Register and prepare effectively for UTME and obtain a competitive score that matches your desired course cut-off mark.
• Take the Post UTME screening seriously because your score will be added to your UTME marks. Target high scores above the cut-off mark.
• If your UTME score is low, adequately prepare for the post-UTME to lift your chances with a higher aggregated score.
• Sit for UTME and Post UTME exams in subjects you made optimal preparations for.
• Apply to less competitive departments that require lower cut-off marks if you are unable to attain your preferred course cut-off mark.
• Do not rely only on UTME grades, use the Post UTME screening to improve your overall score.
• Participate in extra-curricular activities to enhance your admission chances.

In conclusion, with determination, proper planning, hard work, and grace, you can meet the Kogi State Polytechnic cut-off mark for your desired course.

Eligibility Criteria for Kogi State Polytechnic Post UTME Screening

To be eligible to participate in the Kogi State Polytechnic post-UTME screening exercise, candidates must meet the following requirements:

• Attain the Kogi State Polytechnic UTME cut-off mark or above for their chosen course. This is the minimum UTME score set by the polytechnic.
• Must have selected Kogi State Polytechnic as the preferred choice of institution during UTME registration.
• Must satisfy the O’level subject combination and credit requirements for their intended program as specified in the JAMB brochure.
• Must be at least 16 years of age before sitting for the post-UTME screening.
• Candidates who did not initially choose Kogi State Polytechnic but now wish to study at the institution can change their choice to Kogi State Polytechnic through the JAMB website.

Meeting these criteria makes a candidate eligible for the Kogi State Polytechnic post-UTME screening exercise, which is the next stage in the admission process after attaining the departmental UTME cut-off mark.

Conclusion

Meeting the Kogi State Polytechnic cut-off mark is essential to gain admission into your preferred departments and courses. We have provided a detailed overview of Kogi State Polytechnic cut-off marks per department for ND and HND programs in the 2024/2025 academic year.

The cut-off marks serve as a benchmark for the selection of qualified candidates for admission. Ensure you adequately prepare to meet or exceed your departmental cut-off mark. Importantly, apply on time before the closure of the admission portal. Wishing you success in your endeavors.